The Magic Touch USA® MagiCut 123 Flex Heat Transfer Vinyl

The Magic Touch USA® MagiCut 123 Flex Heat Transfer Vinyl
For additional product information Click Here
For additional product information Click Here
Applies great to Cotton, Polyester, Cotton/Polyester Blends, Lycra, and Spandex.
Our Heat Transfer Vinyl works great with all cutters to custom decorate shirts, apparel, bags, and much more.
The product hast a soft hand.
The material presses in 3 seconds!!

1. Cut your design in a Reverse or Mirror Cut.
2. Weed/pick out/remove all excess & unwanted 123Flex material.
3. Place design on garment - sticky glue side will hold it in place.
4. Cover your design with a PTFE sheet
5. Set Heat press to 285-315 degrees Fahrenheit
6. Apply heat for 3 seconds w/Medium pressure
7. Cold or Hot Peel
Material width ranges from 9.5" to 10"