The Magic Touch USA® MagiCut MC Hologram™ Holographic Heat Transfer Vinyl
For additional product information
Click Here
For additional product information
Click Here
The NEW Holographic Line of heat transfer vinyl from The Magic Touch.
Using this material will allow you to visually create three dimensional prism-like effect to your design.
1. Cut your design in a Reverse or Mirror Cut.
2. Weed/pick out/remove all excess & unwanted 123Flex material.
3. Place design on garment - sticky glue side will hold it in place.
4. Cover your design with a PTFE sheet
5. Set Heat press to 315-350 degrees Fahrenheit
6. Apply heat for 12-15 seconds w/Medium pressure
7. Cold or Hot Peel
Login Status