Tape Technologies Cast Opaque Styletech™ V-2000 Series 2 Mil Cast Film
For additional product information
Click Here
For additional product information
Click Here
ON SALE WHILE SUPPLIES LAST
V-2000 SERIES 2 MIL CAST FILM 5-8 YEARS (.05 - .055 MM)
Typical Physical Properties: 2 MIL premium cast film with permanent acrylic adhesive.
PHYSICAL PROPERTIES:
PVC Film Thickness (mils): 2.00
RESISTANCE:
No change to following OEM Tests:
1. Fords acid environment
2. Fords solvent and water environment
3. Fords boiling water emersion
4. Fords various fuel emersions
5. 3 to 1 Zylene/Mineral Spirits emersion
6. Nissan Salt Spray
SHELF LIFE:
1 Year stored under 73º F and 50% relative humidity.
OUTDOOR DURABILITY:
5 to 8 years when properly converted and properly applied, vertical exposure, and non-printed.
NOTE:
All information based on tests believed to be reliable.
These values do not constitute guaranty and do not constitute a warranty.
Purchaser is to independently determine suitability of this material for specific purpose.
Cast vinyl is made by pouring liquid plastic onto a release liner and then allowing it to cure under heat.
This process results in vinyl that is very durable, thinner and very dimensionally stable with less shrinkage than calendered vinyl.
Since it is thinner it will conform to non-uniform surfaces better.
Use this vinyl for longer term applications such as lettering on the side of trucks, billboards, large signs, pin striping and boat graphics.
Any use where there is an expectation of long life is a good application for cast vinyl.
Login Status