|
Includes
Your Choice of a Creation CR Series Cutter
Signcut Software 1 Year Subscription
Signcut is an internet based cutting software and must have a constant connection to the internet to run correctly.
1 hour of Technical Support
Vinyl Introductory Package
Includes:
(1) 24" x 5yd roll of ShineRite® White
(1) 24" x 5yd roll of ShineRite® Black
(1) 6" x 100yd Roll R-Tape AT-60 Clear Transfer Tape
(1) Double-ended Exacto Knife with Weeding Pick
(1) Rolling Scissors
(1) Squeegee Felt Sleeve
(2) 3" x 5" Squeegees
CUTTERPROS WILL GO THE EXTRA MILE FOR YOU
Once your cutter is set up and you are connected to the internet, feel free to call for the following Set Up assistance at no charge.
Cutter Walkthrough:
1) Setting up Roller bars and vinyl
2) Where to place/not place pinch rollers
3) How to work functions on control panel
4) How to install blades
5) Calibrating blade depth
6) Test cut(s) to calibrate
7) Functionality of weeding tools
Signcut Walkthrough:
1) Where to find license
2) Where to find cutter setup information
3) Setting unit of measurement
4) Setting size of image
5) Layering tools if needed
6) Setting vinyl size
7) Cut out Screen specs
8) X.Y Layout
9) Basic tiling information
10) Test Cut
11) Where to find tutorials
Inkscape Walkthrough:
1) Vectorizing Tutorial emailed
2) Where to find help
Miscellaneous:
1) Finding help on the website
AFTER INITIAL SET UP, CUTTERPROS TECHNICAL DIVISION WILL CONTINUE TO OFFER A VARIETY OF TECHNICAL SERVICES AT A CHARGE OF $49.95 PER HOUR. (PREPAID)
OUR TECHNICIANS ARE WELL VERSED IN OUR CUTTERS, HOWEVER WE DO NOT SPECIALIZE IN DESIGN SOFTWARE. IT IS OUR POLICY TO SEND YO TO THE TUTORIALS WITHIN THE DESIGN SOFTWARE THAT YOU USE.
Disclaimer:
If the set up is longer than one hour additional set up technical services will apply before further assistance is given.
| Select Cutter: | |
|