Category Archives: Saga

True Size Scaling in DragonCut

1) Open DragonCut 2) Go to “Tools” on the top menu, select “Plugins & Modules”, select “Vinyl Spooler…” 3) In the Vinyl Spooler, select “Cutter” from the top menu bar, select “Configure Cutter” 4) Select “Units” on the left side … Continue reading

Posted in DragonCut, Saga, Vinyl Cutting Tutorials Tips And Tricks | Leave a comment

Vinyl Cutting Rubber Sand Mask Or Paint Mask

For best results when cutting rubber mask with a vinyl cutter, follow these guidelines: 1) Make sure the cutter is cutting the rubbery side of the material. One side is shiny and slippery, one side is dull and rubbery. Always … Continue reading

Posted in Saga, Vinyl Cutting Tutorials Tips And Tricks | Leave a comment

Changing The Carriage On A Saga Standard Stepper Or Servo Vinyl Cutter

1) Remove plug from vinyl cutter (Always the first step when servicing your cutter) 2) Remove endcaps (four screws on inside plates) 3) Remove the top cover plate (carefully so you don’t pinch the wires on the right side). It … Continue reading

Posted in Cutter Maintenance, Saga | Tagged , , , , | Leave a comment